£ 58.99 (Incl. VAT)
£ 49.16 (Excl. VAT)
The first certified epoxy wood repair paste with 40% bio based raw materials for all types of repairs, all year round.
Ideal for the permanent repair of all types of wood rot and damage throughout the year. Contains 40% bio based raw materials.
Suitable for:
Watch our step-by-step instructional video to see how to apply this product easily and effectively. That way, you’ll get the most out of your repair and work on any project with confidence.
Not sure which product you need for your repair? Our useful product selector will help you get started! Answer a few simple questions and find out which product best suits your job.
* This is an indication for a repair with a layer thickness of 1 cm at 20 º C. The curing may differ due to fluctuations in temperature, layer thickness and humidity, among other things.
| Shelf life | See label; storage and transportation temperature: 5 – 40°C |
|---|---|
| Content | 300 ml + 100 ml |
| Repair thickness | 5 – 50mm |
| Ready for sanding and painting | After 12 hours |
| Application temperature | 0 – 35ºC |
| Application period at 20ºC | 20 – 25 minutes |
| Pre-treat with | DRY FIX® UNI |
| Product or tool | Product |
Remove all decayed wood and pre-treat with DRY FIX® UNI.
Dispense BIO FLEX™ ALLROUND on to the mixing plate with the EASY•Q™ dosing gun (with the tab in the rear position).
Mix components A and B with the EASY•Q™ application knives until a homogeneous colour is reached.
Spread the mixed BIO FLEX™ ALLROUND in a thin layer over the mixing plate (to extend the application period).
Apply BIO FLEX™ ALLROUND and immediately remove excess product.
When cured, sand the surface lightly before applying a paint or stain.
The raw materials of the BIO FLEX™ products consist for a part of BIO based raw materials. These are raw materials recovered from residual products, for example from the food industry.
DRY FLEX® 16 can be used up to 50mm deep in temperatures of 10-35°C. DRY FLEX® 4 can be used up to 20mm deep during warm weather (10 - 35°C) and 50mm in depth during colder weather (0-10°C). DRY FLEX® 1 is suitable for repairs up to 10mm deep. There should always be a minimum depth of 5mm to ensure full flexibility in the cured repair.
During the curing of epoxy, a waxy layer that feels greasy, the so-called amine layer, forms on the outside. This amine layer does not allow good adhesion and drying of the paint system or filler (DRY FLEX® SF). The amine layer can be easily removed by sanding the top layer.
Discover related products that perfectly match this product. These products will help you achieve the best result on your wood repair job.
Need help finding the right product?
