Elastic repair compound for large timber repairs and splicing (paintable after 16 hours*).
Ideal for the permanent repair of decayed and damaged wood. Suitable for large repairs and projects without time constraints.
Suitable for:
* Typical curing time for a repair 1cm thick applied at 20ºC. Temperature and humidity may affect curing times.
Watch our step-by-step instructional video to see how to apply this product easily and effectively. That way, you’ll get the most out of your repair and work on any project with confidence.
Not sure which product you need for your repair? Our useful product selector will help you get started! Answer a few simple questions and find out which product best suits your job.
* Typical curing time for a repair 1cm thick applied at 20ºC. Temperature and humidity may affect curing times.
| Shelf life | See label; storage and transportation temperature: 5 – 40°C |
|---|---|
| Content | 300 ml + 100 ml |
| Repair thickness | 5 – 50mm |
| Ready for sanding and painting | After 16 hours |
| Application temperature | 10 – 35ºC |
| Application period at 20ºC | 1,5 – 2 hours |
| Pre-treat with | DRY FIX® UNI |
| Product or tool | Product |
Remove all decayed wood and pre-treat with DRY FIX® UNI.
Dispense DRY FLEX® 16 on to the mixing plate with the EASY•Q™ dosing gun (with the tab in the rear position).
Mix components A and B with the EASY•Q™ application knives until a homogeneous colour is reached.
Spread the mixed DRY FLEX® 16 in a thin layer over the mixing plate (to extend the application period).
Apply DRY FLEX® 16 and immediately remove excess product.
When cured, sand the surface lightly before applying a paint or stain.
No. The minimum layer thickness for these pastes is 5 mm. For filling, use DRY FLEX® SF.
Yes, as long as the temperature of air and surface are above 0°C. At temperatures from 0°C DRY FLEX® 1, 4, BIO FLEX™ COOL AND ALLROUND can be used. The DRY FLEX® 16 is recommended to be used above 10°C. At lower temperatures please ensure that no condensation forms on the surface to be repaired.
Yes, the pastes can be coloured very well. For this purpose, use small quantities of oil based pigment
Discover related products that perfectly match this product. These products will help you achieve the best result on your wood repair job.
Need help finding the right product?
